4-blade Hay Cutter Pulverizer 220V Output and similar items

4-blade hay cutter pulverizer with belt conveyor This machine is suitable for crushing various grass, corn, wheat, peanuts, beans, straw, potatoes, carrots, cassava and other root crops.The processed feed is more convenient for storage. It is a necessary machine for farmers, small and medium-sized feed processing plants and farms; At the same time, the machine can also be used together with the feed granulator to facilitate the feed machine to shape the feed into granules. Note: 1. In addition to commissioning according to the commissioning method, before starting, the machine must be carefully checked to see if there are tools and objects hindering the startup and operation, and whether the upper casing is locked. 2. Before starting the machine, it is necessary to check whether there are sundries in the machine. Except for processing straw, nothing is allowed to be stacked on the feeding table. 3. Run for 2-5 minutes before operation, check whether the rotating speed meets the requirements of the machine, never allow overspeed, and check whether other parts are abnormal. If everything is normal, the feeding can be started, and the feeding cannot be excessive, so as to prevent damage to the supporting power unit and machine parts due to overload operation. 4. When the machine is operating, it is forbidden to stand at the grass outlet to prevent flying objects from hurting the body. 5. Operators are not allowed to wear gloves, sleeves must be fastened, and those with long hair must wear safety helmets. All personnel must leave the rotating plane of belt and rotating parts. 6.Due to the tight run-in of the new machine, please lubricate the gear when using the machine for the first time, please change the long, short and neutral position when the machine is not working, and manually rotate the gear to change the gear position. After the gear is used for a period of time, after a period of running-in, the long, short and neutral positions can be replaced in the work when there is demand. ? Product parameter: Product Material: Cast iron spray painting Production efficiency: ?500KG/H Feed hopper size: 14.56in*14.56in(37cm*37cm) Power: 2.2KW voltage: 220V Applicable Industries: Farms, Home Use, Retail Product analysis: Feature: This machine is equipped with 4 sets of thickened blades, which can easily cut materials. Double-sided blades extend the service life of the blades. This machine is equipped with a widened and thickened feeding port, which is solid and firm. All kinds of grass can be fed easily. It is equipped with a conveyor belt, which can feed automatically, which is more convenient and fast. The screw in the black circle can be moved back and forth to adjust the tightness of the conveyor belt. Customers can choose the length of material cutting by themselves, and there are two gears for customers to choose. This machine is equipped with lock nuts to ensure the locking and sealing of the engine room and improve the safety. This nut must be locked when the machine is working. This machine is equipped with air switch, which is safer and more secure. This machine is equipped with a voltage display screen for a more intuitive reference to whether the voltage is stable. This machine is equipped with high-quality high-power motor. The feed inlet and feed hopper can be installed separately, and can be removed and placed when not in use, saving space. This machine is equipped with 4 movable wheels, making it convenient for customers to move and transport. The adjustment plate for the opening size of the feeding hopper allows you to choose the size of the caliber for placing root and stem crops such as potatoes and carrots, making it more convenient and practical. The discharge port can be flexibly adjusted in angle and can be disassembled, making it convenient for customers to store and store when not in use. Adding this bucket can achieve the crushing of root crops such as potatoes and carrots. Without this bucket, only straw can be crushed. Precautions for operation: In order to ensure the safety and normal operation of the person and the machine, a special person shall be assigned to be responsible for the storage and use of the machine. The machine shall not be operated without learning this procedure and operation technology and reading the familiar instructions. 1. In addition to commissioning according to the commissioning method, before starting, the machine must be carefully checked to see if there are tools and objects hindering the startup and operation, and whether the upper casing is locked. 2. Before starting the machine, it is necessary to check whether there are sundries in the machine. Except for processing straw, nothing is allowed to be stacked on the feeding table. 3. Check whether the electrical equipment is normal and safe. 4. Check whether the running direction of the main shaft conforms to the direction indicated by the arrow on the casing. If not, immediately adjust and close the power switch to ensure the correct operation of the machine. 5. Run for 2-5 minutes before operation, check whether the rotating speed meets the requirements of the machine, never allow overspeed, and check whether other parts are abnormal. If everything is normal, the feeding can be started, and the feeding cannot be excessive, so as to prevent damage to the supporting power unit and machine parts due to overload operation. 6. Feed crops evenly, not too much, so as not to block the feed inlet. The operator's hand shall not be close to the feeding belt during operation. 7. In case of blockage, stop the machine immediately. After the machine stops stably, open the upper cover, clean the blockage, and then restart. 8. Always pay attention to whether there is abnormal sound during the operation of the machine. Shut down and power off immediately in case of abnormality. 9. There shall be no mortar, sand, stone, iron wire, tool parts or other sundries in the crops to be processed to avoid damage to the machine or accidents. 10. At the end of each shift, the power supply must be cut off after all the crops on the feeding table are fed and no more materials are thrown out at the outlet. 12. When the machine is operating, it is forbidden to stand at the grass outlet to prevent flying objects from hurting the body. 13. Operators are not allowed to wear gloves, sleeves must be fastened, and those with long hair must wear safety helmets. All personnel must leave the rotating plane of belt and rotating parts. ? Details: ? Different places have different Receptacles. Please note this plug and consult your electrician before purchase. Note: We suggest that high-power machines should be directly connected to the main power supply, as the voltage reaching the machine is stable. If the voltage is unstable and the current exceeds the rated current of the motor, it is easy to burn out the starting capacitor. It is recommended to directly connect to the power supply as much as possible. If the machine is not connected to the power supply, different situations may occur, and the wires are not durable. The wires will gradually burn out over time. ? product advantages: ? 1.This machine is equipped with 4 sets of thickened blades, which can easily cut materials. Double-sided blades extend the service life of the blades. 2.This machine is equipped with a widened and thickened feeding port, which is solid and firm. All kinds of grass can be fed easily. It is equipped with a conveyor belt, which can feed automatically, which is more convenient and fast. 3.Customers can choose the length of material cutting by themselves, and there are two gears for customers to choose. 4.The screw in the black circle can be moved back and forth to adjust the tightness of the conveyor belt. 5.This machine is equipped with lock nuts to ensure the locking and sealing of the engine room and improve the safety. 6.This machine is equipped with air switch, which is safer and more secure. 7.The feed inlet can be installed separately, and can be removed and placed when not in use, saving space. 8.The blades of this machine can be replaced. 9.This machine is equipped with high horsepower and high-quality motor. 10.The conveying roller of this machine can fluctuate flexibly according to the amount of material, which is more humanized. Product display: Item Number: 1*4-blade hay cutter pulverizer with belt conveyor (239760) You can make order with no worry. Any concerns just feel free to let us know, we'll reply in 24 hours in normal condition. Handling Time: Shipping is usually made in 1-3 business days after payments cleared. Orders are processed from Monday-Friday; Not on the weekends public holidays. Warranty: 6 months' warranty for the machines, not for the consumables. We stand behind our products all the item, so even if your warranty period has expired, you can still seek for service or technical support from us with low cost.