Silicom PEG4BPFI-ROHS Quad Port Fiber (Sx) and 26 similar items

PLEASE BE SURE TO READ THROUGH TO THE BOTTOM OF THE PAGE BEFORE PURCHASE IITEM DESCRIPTION: SILICOM PEG4BPFi-RoHS INCLUDES: CARD, DRIVER CD Silicom?s Quad Port Fiber Gigabit Ethernet Bypass server adapter is a PCI-Express X8 network interface card that contains four on a PCI-E adapter. Silicom?s Quad Port Gigabit Ethernet Bypass server adapter supports Normal, Bypass and Disconnect modes. In Normal mode, the ports are independent interfaces. In Bypass mode, all packets received from one port are transmitted to adjacent port. In Disconnect mode, the adapter simulates switch / rout cable disconnection. In Bypass mode, the connections of the Ethernet network ports are disconnected from the interfaces and switched over to the other port to create a crossed connection loop-back between the Ethernet ports. Hence, in bypass mode all packets received from one port are transmitted to other port and vice versa. This feature enables to bypass a failed system and provides maximum up time for the network. In Disconnect mode, the adapter simulates switch / router cable disconnection. In Disconnect mode, the switch / router does not detect link partner of the adapter. Silicom?s Gigabit Ethernet Bypass server adapters include an on board WDT (Watch Dog Timer) controller. The adapter?s software drivers or software application can write commands to the on board WDT controller. The adapter?s software drivers, WDT controller and the Bypass circuitry provide an interface that control and manage the mode of the adapter. Silicom?s Quad Port Fiber Gigabit Ethernet Bypass server adapter is based on Intel 82571 Dual port Gigabit Ethernet MAC+PHY of Intel Controller. Bypass: Bypass / Disconnect Ethernet ports on Power Fail, System Hangs or Software Application Hangs Software programmable Bypass, Disconnect or Normal Mode On Board Watch Dog Timer (WDT) Controller Software programmable time out interval Software Programmable WDT Enable / Disable counter Software programmable Bypass Capability Enable / Disable Software Programmable Disconnect Capability Enable / Disable Software Programmable mode (Bypass, Normal or Disconnect mode) at Power up Software Programmable mode (Bypass, Normal mode) at Power off Independent Bypass operation in every two ports Emulates standard NIC Fiber Gigabit Ethernet 1000Base-SX: Independently Fiber Gigabit Ethernet channel/s support Gigabit Ethernet 1000Base-SX Small Form Factor (SFF) LC Connectors Fiber Gigabit Ethernet 1000Base-LX: Independently Fiber Gigabit Ethernet channel/s support Gigabit Ethernet 1000Base-LX Small Form Factor (SFF) LC Connectors Common Key features: Host Interface standard support PCI Express 1.0a High performance, reliability, and low power use in Intel 82571 dual integrated MAC + PHY and SERDES chip controller Ultra deep packet buffer per channel lowers CPU utilization Hardware acceleration that can offload tasks from the host processor. The controllers can offload TCP/UDP/IP checksum calculations and TCP segmentation Priority queuing ? 802.1p layer 2 priority encoding Virtual LANs ?802.1q VLAN tagging Jumbo Frame (9KB) 802.x flow control Statistics for SNMP LEDs indicators for link/Activity/Bypass Mode status Bypass Specifications: WDT Interval (Software Programmable): 3,276,800 mSec (3,276.8 Sec): Maximum 100 mSec ( 0.1 Sec) : Minimum WDT Interval = (2^wdt_interval_parameter)*(0.1) sec. wdt_interval_parameter: { Valid Range: 0-15} Fiber Gigabit Ethernet Technical Specifications ? (1000Base-SX) Adapters: IEEE Standard / Network topology: Fiber Gigabit Ethernet, 1000Base-SX (850nM) Data Transfer Rate: 2000Mbit/s in full duplex mode per port Cables and Operating distance: Multimode fiber: 137m maximum at 62.5 um ** ** PXG2BPFI Theoretical Distance ? Defined as half a distance as stated by the IEEE 802.3 standard Optical Output Power: Normal Mode (Bypass Off): Typical: -6.8 dBm (TX ?Switch Norma ? Fiber ? LC/LC) Minimum: -10.9 dBm Optical Receive Sensitivity: Normal Mode (Bypass Off) Typical: -19.7 dBm Maximum: -15.6 dBm Insertion Loss: Bypass Mode: Insertion loss (Optical Power attenuation between TX to RX) Typical: 0.79 dB (From RX to TX) Maximum 1.9 dB Fiber Gigabit Ethernet Technical Specifications ? (1000Base-LX) Adapters: IEEE Standard / Network topology: Fiber Gigabit Ethernet, 1000Base-LX (1310nM) Data Transfer Rate: 2000Mbit/s in full duplex mode per port Cables and Operating distance: Single-Mode fiber: 2500m at 9um ** ** PXG2BPFI-LX Theoretical Distance ? Defined as half a distance as stated by the IEEE 802.3 standard Optical Output Power: Normal Mode ( Bypass Off): Typical: -7.3 dBm ( TX ?Switch Norma ? Fiber ? LC/LC) Minimum: -10.9 dBm Optical Receive Sensitivity: Normal Mode (Bypass Off) Typical: -18.9 dBm Maximum: -18.6 dBm Insertion Loss: Bypass Mode: Insertion loss (Optical Power attenuation between TX to RX) Typical: 1.21 dB (From RX to TX) Maximum 1.9 dB Operating Systems Support Operating system support: Windows (-SD, Side driver) Linux FreeBSD VMware General Technical Specifications Interface Standard: PCI-Express Base Specification Revision 1.0 Board Size: PCI add in card: 214.6mm x 111.15mm (8.45?X 4.376?) PCI Express Card Type: X8 PCI Express Voltage: +3.3V 9%, +12V 8% PCI Connector: Gold Finger: X8 Controller: Intel 82571EB Holder: Metal Bracket: Full Height I/O: Located on the metal bracket Weight: 280 gram, (9.878 Oz) Power Consumption: PEG4BPFI-SX 8.9W, 0.34A at 12V and 1.45A at 3.3V: Typical all ports operate at 1000Mbit/s 8.9W, 0.34A at 12V and 1.45A at 3.3V: Typical No link at all ports 8.6W, 0.34A at 12V and 1.38A at 3.3V:Bypass Mode Operating Temperature: 0C ? 50C (32F ? 122F) Storage: -20C?65C (-4F?149F) EMC Certifications: FCC Part 15, Subpart B Class B Conducted Emissions Radiated Emissions CE EN 55022: 1998 Class B Amendments A1: 2000; A2: 2003 Conducted Emissions Radiated Emissions CE EN 55024: 1998 Amendments A1: 2000; A2: 2003 Immunity for ITE Amendment A1: 2001 CE EN 61000-3-2 2000, Class A Harmonic Current Emissions CE EN 61000 3-3 1995, Amendment A1: 2001 Voltage Fluctuations and Flicker CE IEC 6100-4-2: 1995 ESD Air Discharge 8kV. Contact Discharge 4kV. CE IEC 6100-4-3:1995 Radiated Immunity (80-1000Mhz), 3V/m 80% A.M. by 1kHz CE IEC 6100-4-4:1995 EFT/B: Immunity to electrical fast transients 1kV Power Leads, 0.5Kv Signals Leads CE IEC 6100-4-5:1995 Immunity to conductive surges COM Mode; 2kV, Dif. Mode 1kV CE IEC 6100-4-6:1996 Conducted immunity (0.15-80 MHz) 3VRMS 80% A.M. By 1kHz CE IEC 6100-4-11:1994 Voltage Dips and Short Interruptions V reduc 95%, 30% 95% Duration 0.5per, 25per, 250per MTBF: 61 (Years) *According to Telcordia SR-332 Issue 1 Environmental condition ? GB (Ground, Fixed, Controlled). Ambient temperature ? 25C. Temperature rise of 15C above the system ambient temperature was assumed for the cards components LEDs LEDs: (2) LEDs per port Link: Turns on link (yellow). ACT: Blinks on activity (green). (1) Bi-Color LED per Bypass pair: Bypass: Green on Bypass, Yellow on Disconnect, off on Normal LEDs location: LEDs are located on the PCB, visible via holes in the metal bracket holder Connectors: (4) LC ITEM CONDITION AND NOTES: THIS ITEM IS REFURBISHED, SEE NOTES PLEASE DOUBLE CHECK YOUR COMPATIBILITY BEFORE YOU BID THE TERMS NEW, USED, ETC, REFER TO CONDITION, NOT PRODUCT AGE INTERNAL CODE: 3361 BS8A PLEASE READ BELOW BEFORE PURCHASING!! PAYMENT MUST BE RECEIVED WITHIN 7 DAYS OF THE END OF THE AUCTION PLEASE CONTACT US WITH ANY QUESTIONS ABOUT THE ITEM BEFORE MAKING THE PURCHASE PLEASE CONTACT US WITH ANY ISSUES BEFORE LEAVING FEEDBACK WE ONLY SHIP INTERNATIONALLY THROUGH THE GLOBAL SHIPPING PROGRAM PA RESIDENTS MUST PAY 6% SALES TAX ON ITEM SHIPPING WE HAVE BEEN IN BUSINESS FOR OVER 25 YEARS, VISIT OUR STORE FOR ALL OF YOUR OTHER NEEDS! SHIPPING WARRANTY PAYMENTS RETURNS All items are shipped via USPS, unless otherwise noted. Shipping rates are supplied within the auction, and are based on weight, size, and your location. Local pick-up is FREE! Please arrange for this BEFORE bidding. Small items are packed in padded envelopes, and large items in boxes with packing material. Items returned to sender will require additional payment to re-ship. Multiple item purchases are typically eligible for a combined shipping discount. Shipping and Handling includes insurance. All items come with a 30 day DOA (dead on arrival) warranty, except AS-IS items (by listing or law). All DOA claims must be made within 30 days from the item delivery date. Items listed with additional manufacturers warranties require dealing direct with the manufacturer for ALL warranty claims. Items returned for warranty will be replaced with an identical item. If item is not in stock, a refund will be issued. All returned items will be tested, and serial numbers verified within our database. If an item is returned as DOA or NON-WORKING, and it is found to be functional, a 20% re-stocking fee will be applied and return shipping will be charged. Please do NOT pay for an item until you are sure you will be completing the purchase. Purchases that are requested to be to be cancelled after a payment has been made, will be subject to a 15% processing fee. Any payments other than standard PayPal or Credit Card, will be held for up to 15 days to "clear" before shipment. We will only ship to the confirmed and verified address on your payment account. No exceptions! All returned or rejected payments are subject to a $35 administrative fee. Items are normally shipped within 1 business days after payment has cleared, unless otherwise noted. Any overpayment for shipping or multiple items will be credited back to the payment account. Consult the auction for details on the return policy specific to your item. Items that are unopened, unused, undamaged, and in original packaging may be returned within 30 days of delivery date. Unless otherwise noted. Sealed items must still be sealed. Software, Video Games, Music, Movies, batteries, and AS-IS items cannot be returned. No exceptions! A 20% restocking fee will apply to all returned items that are not covered under the DOA warranty or due to a mistake made by CSACOM Shipping, handling, and insurance of returning an item is the buyer's responsibility. See warranty section to the left for more information on returns. SHIPPING WARRANTY PAYMENT RETURNS