This Sigma 6100MP Submersible Level Sensor 316 SS is in new condition and guaranteed to functions 100%. It came from a local MFG that was upgrading equipment and we can accept pay pal or your credit card. Please contact me with any questions. P/N 6100MP-030-1-DS-SO-50 S/N 605414-01 CAL 0-70.0 FT. WC P/N NOMENCLATURE INFORMATION 6100MP= MODEL: 316 SS BODY 030= RANGE: 030 = 0/30 = 0/70 FT WC 1= OUTPUT: 4/20MA DS= FILL LIQUID: SILICONE 200 FILL LIQUID SO= OPTIONS: STAND OFF/SUPPORT 50= CABLE LENGTH: 50 FT Series 6100MP bore microprocessor based submersible level transducer. Designed for sludge and sewage. The Series 6100MP Microprocessor Based Level System is composed of a lower assembly sensor, submersible cable and optional meter/controller. The lower assembly sensor has a 316SS body, a 2 oe inch diameter Viton* convoluted diaphragm and an isolated solid state piezo-resistive pressure transducer. The integral microprocessor based electronics provide active temperature compensation and significantly improved performance while offering a range of outputs including 4/20MA and RS485 MODBUS. The submersible cable is 20-gauge direct burial polyurethane jacket shielded cable available in unspliced lengths to 1000 feet. Mounted in a fixed submerged position, the Series 6100MP sensor measures the head pressure imposed on the diaphragm by the liquid height above. Calibrated to the specific gravity of the process fluid, the sensor operates reliably in still and wastewater wet wells as well as sludge and process sumps, tanks and reservoirs. The 6100MP sensor is an excellent choice for measuring levels of dense sludges since it provides reliable data without the complexity and clogging often associated with other types of systems. The straight-forward design and construction of the 6100MP sensor recommends it for use in water, wastewater and process applications whenever an analog or digital signal is required for pump control, indication, alarm or telemetry applications. The MODBUS? digital output compatible with all Myriad monitors and control devices and permits the direct connection of the transmitter to our spread spectrum radio modem for long distance transmission of level signals without the need for and RTU.