This panel mount solid state relay offers 4 -32VDC input control, with a switched output rated at 30VDC/ 100Amps. Switching high current DC loads normally requires use of a contactor to avoid arcing as the contacts try to separate. This solid state relay uses MOSFET technology to provide an economical and reliable method of switching medium to high power DC loads. This means there is no arcing and the low on-state resistance provides a viable alternative to the bulky and expensive contactors. Note: Inductive loads must have diode suppression (Refer data sheet wiring diagram) Output Circuit Load Voltage: 0-30VDC Load Current: 0.02-100A Max On-State Resistance: 0.007Ohms Max On-State Voltage Drop: 0.35V Max Turn On Time: 0.5ms Max Turn Off Time: 0.5ms Max Surge Current: 240A (10ms) Input Circuit Control Voltage: 4-32VDC Control Current: 28mA max. Min Turn Off Voltage: 1.0VDC Input Resista DC Voltage : 3V, 32V DC Current Draw : 28mA Mounting Method : Chassis Attachment / Securing Method : Screw Down Mount Screw Quantity : 2pc Mount Screw Size : 2mm Overall Screw Spacing (H) : 47.5mm Device Type : Solid State Relay Input : DC Contact format : SPST DC Contact Voltage : 0V, 30V DC Switching Current (Closing) : 0.02A, 100A Operation Time : 0.5ms Release Time : 0.5ms