Description Imagine combining the strength and efficiency of High Voltage amplifier modules with the intelligence of the Smart line. This is the essence of the HV3000 Chipeo Smart. Equipped with the advanced Power Control System, which maintains the amplifier's maximum power at impedances of 1 to 2 ohms, it now also controls and maintains 3000 Watts RMS regardless of the input voltage, in systems that use power supply between 120 and 350 V DC (from 10 to 24 batteries in series). Furthermore, its wide frequency response of 10Hz to 30kHz enables the amplification of a wide range of sounds, from deep bass to clear treble. In other words, you now have a High Voltage amplifier that can be used with Subwoofers, Bass, Mid-bass, Midrange, Phenolic Drivers, Titanium Drivers, Super Tweeters, Full Range Speakers, among others, with the advantage of drastically reduce the consumption of the 12 Volt system. Explore the power of the HV3000 Chipeo Smart and raise the level of your automotive sound. Technical information Minimum Output Impedance 1 Ohm ~ 2 Ohms Number of channels 01 Rated power 1 Ohm: 3000W RMS 2 Ohms: 3000W RMS 4 Ohms: 2000W RMS Input sensitivity 0.5V RMS ~ 4V RMS Signal/Noise Ratio 95 dB Frequency response 10 Hz ~ 30 KHz (-3 dB) 2 Ohms Efficiency 80% Input Impedance 16K Ohms Output Short protection system, output short in relation to GND, Low Voltage, High Voltage and Thermal Protection. Minimum supply voltage 120VDC Maximum supply voltage 350 VDC Maximum Musical Consumption @12.6VDC: 1A Maximum consumption in sinusoidal signal 23A Dimensions (WxHxD) 239 x 73 x 329 mm Weight 3.95 kg Total harmonic distortion 1%